VNA Pallet Racks

VNA pallet rack is a kind of storage rack, because the forklift handling channel of the rack system is relatively narrow, so it is called narrow aisle or narrow channel rack. The selected forklift is a three-way forklift system. Compared with the conventional pallet racking system, the difference is that the lane width of the narrow aisle pallet racking system is much smaller than that of the conventional pallet racking system, generally about 1600-2000mm. The space utilization rate has been increased by about 20%. Guide guard rails must be set on both sides of the aisle to guide the three-way forklift.

The main body of the racking system is a beam-type racking system, the difference is that the action rails of the "three-way stacking forklift" are installed on the ground at the bottom of the rack. The guide rails are conventionally made of unequal angle steel. Material handling forklifts are limited to dedicated "three-way stacker forklifts". The three-way stacker forklift slides along the established guide rails. The width of the stacking channel of the racking system is slightly larger than the width of the palletized goods, and high-density storage requirements are realized. At the same time, it inherits all the advantages of the beam racking system. All the materials stored in the racking system are 100% optional, and the forklift can store any pallet of goods at any time. Fast storage efficiency and very high storage density bring significant production efficiency and cost-effectiveness to storage and logistics centers suitable for narrow aisle racking systems.

If the storage or logistics center has the following characteristics, the narrow aisle racking system can be considered:

1. The amount of stored goods is large, the goods are frequently in and out, and there are high picking requirements for goods;

2. The storage and logistics center urgently needs to increase the number of storage spaces or requires a certain amount of storage;

3. The logistics efficiency requires a higher level;

4. The available net height of the warehouse is higher, more than 8M;

5. The forklift can be selected as an independent storage forklift, and it is not planned to use the storage forklift to drive out of the room to perform other tasks.